USB ANDROID CAR TPMS
TPMS Receiver connect with player by USB port, install my APK, will display 4 or 5pcs tire pressure and temperature, and will give alarm once any tire is unnormal
Contact us National Advisory Hotline
134-2312-8860
Special for car Android player, TPMS Receiver connect with player by USB port, install my APK, will display 4 or 5pcs tire pressure and temperature, and will give alarm once any tire is unnormal.
Internal sensor can use NXP chip or Senasic chip of China, Optional. support external and internal sensor. 4 tires pressure display at the same time
1.2 Product introduction
1.2.1. Internal sensor will be installed in tire, external be fixed valve of car through screw. they can get tire pressure and temperature, then send them by wireless of 433.92mhz
1.2.2. Receiver will get all tires data from sensor, such as tire pressure, temperature, sensor battery voltage, and all tire status, then send them to Android car player/radio by USB port
1.2.3. Use my APK only.
Applicable to the tire pressure under 8ar/116psi
2、Product function features
2.1 Receiver(model:usb100)
1. Tire data send to Android equipment by USB port
2.Support up 5 tires
3. With the functions of ID learning/ID query/pressure and temperature measurement
2.2 Internal sensors(model:CN202)
1. FSK modulating for RF signal, ASK modulating for LF signal
2. All imports car-standard material, long life, high stability and strong anti-interference ability
3. Air pressure and temperature can be measured and monitored simultaneously, and have self-test and tire leakage monitoring function
4. Internal sensor is only apply to all tubeless tire
5. Adopt IP67 protection grade,
2.3 External sensor(Model:CW101)
1a、FSK modulating for RF signal, ASK modulating for LF signal
2a、All imports car-standard material, long life, high stability and strong anti-interference ability
3a、Air pressure and temperature can be measured and monitored simultaneously, and have self-test and tire leakage monitoring function
4a、External sensor is apply to all tire, no Metter tube or tubeless tire
5a、Adopt IP69 protection grade
6a、Light weight, small volume
3. Product technical parameter
3.1 Receiver
No. |
Item |
Technical parameter |
1 |
Input voltage |
DC 4.5V TO 5V |
2 |
Working current |
≦10mA |
4 |
HF receive frequency |
433.92MHz±50KHz |
5 |
HF receive sensitivity |
﹤-105dBm |
6 |
Working temperature range |
-40℃~85℃ |
7 |
Data transmission mode |
USB |
No. |
Item |
Technical parameter |
1 |
Battery model No. |
CR2050(450mAh)/CR2032(350mAh) |
2 |
RF frequency |
433.92 MHz±38 KHz |
3 |
Standby current |
﹤0.7 uA |
4 |
Emission current |
﹤8 mA |
5 |
HF emission power |
﹤8 dbm(50Ω) |
6 |
HF modulation mode |
FSK |
7 |
LF receive frequency |
125 KHz±5 KHz |
8 |
LF modulation mode |
ASK |
9 |
Pressure measurement range |
0-800kpa(0~116psi) |
10 |
Pressure measurement accuracy |
±10kpa/±2.9psi(0℃~70℃) |
±48kpa/±6.96psi(-40℃~125℃) |
||
11 |
Temperature measurement range |
-40℃~125℃ |
12 |
Temperature resolution |
1℃ |
13 |
Temperature measurement accuracy |
±3℃(0℃~70℃) |
14 |
Working temperature range |
-40℃~125℃ |
15 |
Storage temperature range |
-40℃~125℃(Suggest storage in normal temperature) |
16 |
Protection grade |
IP67 |
17 |
Battery lifespan |
Over 5 years |
3.3 External sensor
No. |
Item |
Technical parameter |
1 |
Battery model No. |
CR1632(140mAh) |
2 |
RF frequency |
433.92 MHz±38 KHz |
3 |
Standby current |
﹤0.7 uA |
4 |
Emission current |
﹤8 mA |
5 |
HF emission power |
﹤8 dbm(50Ω) |
6 |
HF modulation mode |
FSK |
7 |
LF receive frequency |
125 KHz±5 KHz |
8 |
LF modulation mode |
ASK |
9 |
Pressure measurement range |
0-800kpa(0~116PSI) |
10 |
Pressure measurement accuracy |
±10kpa/±1.45psi(20℃~50℃) |
±48kpa/±6.96psi(-40℃~125℃) |
||
11 |
Temperature measurement range |
-40℃~125℃ |
12 |
Temperature measurement accuracy |
±4℃(0℃~70℃) |
13 |
Working temperature range |
-30℃~85℃ |
14 |
Storage temperature range |
-20℃~85℃(Suggest storage in normal temperature) |
15 |
Protection grade |
IP67 |
16 |
Battery lifespan |
Over 2 years(Battery can be replace) |
4、Product Size(Unit:mm)
4.1 Receiver
4.2 Internal sensor
4.3. external sensor
Installation