Smart phone APP Long distance Remote engine start stop

Support list

Step 1. Connect the A connector. Don't hit the

brakes, Click 2 times push button to ON

Notice: Pay attention to the LED status when you operate

Step 2. LED of main box will change to green

from Red, then turn off

Step 3 . Let push button of car OFF, Then

Remove cable A, then connect cable B

Step 4. Let push button of car ON again, Led

change to RED from Green, then off,

then Let Push button OFF again

Step 5 The matching is successful.

Reset the model when you use the model to new car
1. Power off car
2. Click small botton on the main box, and keep, don't release
3. Connect C cable with main box,the red led will shanling .
4.  Release the button,then wait RED led turn off

Notice:  Please operate reset step if you used the modeland matched it  in car, then want to use it again in new car

Function

A. Remote start engine by original key or smart phone

Click 3 times Lock button, Car engine will be started.

B. Stop your engine by original key or smart phone

Click 3 times Lock button again, Car engine will be stopped.

C. Warm your car early in the winter

If your car turns on the air conditioner early,

when you start the car by remote start module,

you can also turn on the heat inside the car.

D.  Pre-refrigerate your car in the summer

If your car turns on the air conditioner early, you can turn on the air conditioner when you start the car.

How to exit the pause mode

1. We can check the main box if it goes into the pause mode and what's the pause mode:

Click 3 times lock button ,  The car's direction light blinks three times, three seconds after that, The car engine would not start and failed to restore factory Settings.

2. Exit pause mode:

Click original car Push start button from OFF to ON to OFF , and operate 5 times,  Led of main box will blink 2 times, then will exit the pause mode.

Note: OFF-ON-OFF, it's 1 times.   total 5 times.

3. Check:

Click 3 times lock button, car engine will be started